Overview
Simon XT is a cost-effective security system that offers up to
40 zones of burglary and fire protection and complies with SIA
False Alarm Standards. With a built-in display touchpad and status
speaker that provides visual and voice messages for feedback,
Simon XT is well suited for houses, apartments, and condominiums.
The Simon XT panel comes standard with 40 wireless zones, or it
can be set up with 38 wireless zones and two built-in hardwired
supervised burglary zones (normally-closed loop only). The
built-in radio receiver works with both Crystal and SAW Learn
Mode sensors.
Simon XT supports off-premise telephone control to arm and
disarm the system, check system status, activate no entry delay,
or activate the latchkey feature. With latchkey capabilities, the
panel can be programmed to notify customers if the system has
not been disarmed at a scheduled time.
Convenient and expandable
Simon XT supports convenient system operation from anywhere
within the premises with the use of wireless touchpads. Choose
from the Remote Handheld Touchpad, 2-, 4-, or 5-button crystal
or SAW Keychain Touchpads (keyfobs), or 2-Button ELM Keychain
Touchpad. ELM (encrypted learn mode) technology secures every
keychain touchpad transmission. When powered by the optional
line carrier transformer, adding X10® modules lets customers
control lights, appliances, and other devices.
Enhanced monitoring
Simon XT can send messages to a central monitoring station
using SIA or Contact ID (CID) formats. The panel can also report
alarms to another land-line phone location or cell phone using
Voice Event Notification. Built-in 2-way voice capability with
VOX (voice activated switching) provides additional security
and emergency contact with the control monitoring station.
Effortless programming
System programming can be done from the panel using the
built-in touchpad, or off-site using Enterprise Downloader
Software (revision 3.4 or later). |
|
Standard Features
• 40 wireless zones — two can be hardwire
(normally-closed loop only)
• Supports both Crystal and SAW Learn Mode sensors
• Supports repeaters
• Supports two-way RF products (version specific)
• Indoor and outdoor motion sensors
• Chime feature for monitoring door, window, or
motion activity
• 1 master access code and 8 programmable
user access codes of 3 to 6 digits
• SIA or CID central station reporting formats and
Voice Event Notification reporting via PSTN (native)
and/or GSM, IP (with optional modules)
• Programmable No Activity and No Usage report features
• Built-in 2-way voice
• Meets SIA False Alarm Standards
• 100-event buffer with time and date stamp
• Panel voice and beeps that can be disabled
• Program panel with built-in touchpad or
Enterprise Downloader software v3.4 or later
• Firmware flash upgrades can be done remotely
• Expansion options
• Internet based interactivity
(with Alarm.Com GSM module & service)
• Support for on-premise remote control with optional
talking touchpad accessory
|
Specifications
Electrical
• Required transformer: Class II, 9 VAC, 3.34A, 60 Hz (60-899, 60-899-CN in Canada)
• Fuse: Non-replaceable transformer fuse
• Backup batteries: 6 VDC, 1.2 Ah lead acid (60-914)
• Backup time: 24 hours (fully charged)
• Battery test: 10 seconds under load every 4 hours
Radio receiver
• Type: SAW-controlled superheterodyne
• Frequency: 319.5 MHz/ Bandwidth 350 kHz
• Sensitivity: -110 dBm nominal
• Nom. range without GSM module present: 1000 ft. open-air receiving range
• Nom. range with GSM module present: approx. 500 ft. open-air receiving range
Telephone/modem
• Dialing: DTMF or pulse
• Modem: Modified Bell 103 (110 or 300 bps)
• Telephone interface: Line seizure relay
Inputs/outputs
• Total input zones: 40 or 38 wireless and 2 hardwire (normally-closed loop only)
• Auxiliary power: Unregulated 5.1 to 12 VDC; power-limited to 250 mA (maximum) @ 10 VDC
• Siren output: 1 Hardwire Interior Siren (5.1 to 9 VDC)
Digitized voice
• Digitization type: Continuous Variable Slope Delta (CVSD) Modulation
• Playback rate: 88,200 bits/second
Environmental
• Operating temperature: 32 to 122°F (0 to 50°C)
• Relative humidity: 90% max., non-condensing
Physical
• Color: White
• Dimensions (LxWxD): 5.7 x 7.05 x 2.1 in. (144 x 179 x 53 mm)
• Weight, without battery: 1.0 lb. (454 g)
• Installation: Wall mount
• Construction, chassis: ABS
Regulatory
• FCC: Part 15, Part 68
• UL: 985, 1023, 1635/ULC Listing ORD-C102319-74,ULC-S545-M89 (Pending)
• CSFM: California State Fire Marshall (Pending) |
